|
|
Measuring probe tips in engineering metrology
Böhm, Jakub ; Harčarík, Matej (referee) ; Jankových, Róbert (advisor)
This diploma thesis deals with measuring touches problems in industrial metrology. Thesis describes adhesive wear and tear which is caused by measuring probes when dynamical measuring is being concluded. Measuring of damaged component made of silumin and its different changes of texture by different measuring probes are evaluated. Measuring touches are made of titanium nitride, silicon nitride, zirconium, bearing chrome steel, ruby, experimental composite material and nanocrystalline diamond.
|
|
|
Calibration management system of measuring machine (CMM)
Lysý, Zbyněk ; Pernikář, Jiří (referee) ; Koška, Petr (advisor)
This diploma thesis with title of „Management of Coordinate Measuring Machine Calibration“ aimed to develop detailed analysis of uncertainties when deploying 3D coordinate measuring machine MicroVu Excel in practice. The analysis was supported by an example of measuring uncertainty calculation. This thesis also discusses the integration of automatic assessment of uncertainties into programming equipment; and creation of methodical calibration process for this kind of machine.
|
|
|
Facelift PDU
Zhakupbekova, Rakhil ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The subject of the diploma thesis is the elaboration of an architectural study of the reconstruction of the pre-plant zone of the Facelift of the Dukovany power plant. The construction site is an area that belongs to the village of Dukovany and borders the village of Rouchovany. As a whole, this area is in poor technical and architectural condition. However, its location gives potential for new uses. The solved area belongs to the ČEZ nuclear power plant.
|
|
|
Electricity Meters Utilization for Advanced Monitoring and Control of the Power Distribution Systems
Bernát, Jan ; Pithart, Jan (referee) ; Drápela, Jiří (advisor)
This thesis deals with a research of static meters manufactured nowadays usable in systems of smart metering. Static meters and their functions are described in terms of their internal organization, metrology and wiring. Emphasis is given to the description of new functions (detailed measuring, calendar, disconnector, communications etc.) which could not be used with induction meters and to requirements for measuring, for expenditure control, for safety of meters and for the concept description of smart grids. In a practical part of the thesis particular systems of smart metering will be described – AMR, AMM, AMI and their advantages and benefits during their deployment. The thesis includes also a catalogue of meters usable for smart metering, which is based on available information from particular producers. The final part of this thesis gives information about a pilot project of ČEZ company and about another possible functions of smart meters which could be of use in the future.
|
|
|
Facelift PDU
Růžičková, Tereza ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
The theme of the diploma thesis is the solution of the pre-plant zone of the Dukovany nuclear power station. Creating a vision of how this space could develop further in the next 50 years and how it could work in a transitional phase during the construction of a new nuclear power plant unit. The subject of the thesis is the elaboration of an architectural study, which is based on an urban study. Urban study was processed within the framework of the pre-diploma thesis and solved mainly the overall problems of this area, the new transport connection, and the functional division of the whole area. The area was divided into three functional units, namely the transport zone, the administrative zone and the sports and education zone. At present, there are a lot of small structurally and functionally unsuitable buildings in this area. The diploma thesis deals with the design of new buildings with a clear functional use in the administrative zone, in the area in front of the main gatehouse. A new representative square was created, and three buildings are designed around it. The dominant feature of the whole area was a high-rise office building near the gatehouse. In front of the office building, towards the main road, the service building I was designed, which contains business and healthcare services. On the other side of the square was located the service building II, where there are technical services, such as workshops, warehouses and metrology. The last building solved within the diploma thesis is the building of sports and locker rooms of suppliers, which is designed behind the square near the greenery. New building copies mass of the only preserved building in this area, namely the building of the information centre. The designed building has a fitness centre and locker rooms of external workers of the power plant.
|
|
|
Evaluation of control processes
Šimák, Martin ; Koška, Petr (referee) ; Pernikář, Jiří (advisor)
This bachelor thesis studies the theory of evaluation of control processes. The first part of the thesis discusses about organization of national legislation and metrology legislation. The next part of the study focuses on metrology terms, theory introduction to measurement uncertainty and their expression. The final section of the thesis is devoted to statistic evaluation of processes.
|
|
|
Contact and non-contact method of surface texture evaluation
Harčarík, Matej ; Hammer, Miloš (referee) ; Jankových, Róbert (advisor)
The goal of this thesis was to create an overview of methods of surface texture evaluation, to analyse measurements of roughness profile parameters made with contact instruments and non-contact instrument Talysurf CCI Lite and to deduce practical recommendations from them. Based on measurements made, analyses of influence of cut-off settings on roughness measurement and of measurement variability were performed. Steps of the measurement process requiring special attention were identified. The output of this thesis is a proposal of measurement procedure for Talysurf CCI Lite.
|
|
| |
|
|
Expressing uncertainty of accurate lenght measurement II
Šrámek, Jan ; Pernikář, Jiří (referee) ; Koška, Petr (advisor)
This diploma thesis is supposed to inform readers interested in the distance measurements uncertainty on practical issues connected with the solving of these troubles when utilising a frequently used calibration method - the Tesa NPL measure instrument. This measuring was implemented by the Czech Metrologic Institute, where the author works; therefore he could take advantage of his rich experience as well as experience of his superiors and colleagues. The author regards the national metrological institute (CMI) as a sufficient guarantee for the hereinafter presented materials, both regarding the professional qualification and from the perspective of formal rightness of this thesis.
|
|
|
Measurement of Surface Texture Parameters of Products Using Contact and Non-contact Methods
Harčarík, Matej ; Hammer, Miloš (referee) ; Jankových, Róbert (advisor)
This master’s thesis includes an overview of profile method of surface texture evaluation according to ISO standards and VDA automotive standards, as well as an overview of areal method according to ISO 25178 standard series, which includes a proposal for improvement of czech terminology. Suitability of application of selected measurement methods for measurement of a portfolio of automotive parts was evaluated based on measurements carried out using a contact profiler, a coherence scanning interferometer and a confocal microscope. Further recommendations for practice in surface texture metrology were also formulated. A regression analysis of the relationship between values of selected profile surface texture parameters and their areal equivalents was also performed. Its results may aid the spread of areal surface texture evaluation in the industry.
|
guest ::
